Installing a New Toilet? Here’s What You Need to Know

Bathrooms often serve as the focal point of a home. Upgrading or remodeling your bathroom can give it a fresh, new look and potentially increase the value of your home. One of the most important components of any bathroom is the toilet. Installing a new toilet can be a daunting task. Here are a few things to consider before setting out on your toilet installation project:

Tools and Supplies

Before attempting to install your new toilet, make sure you have the right tools and supplies. You will need:

• Adjustable Wrench

• Screwdriver

• Wax Seal

• Broom

• Sponge

Instructions

Once you’ve gathered the tools and materials you need, it’s time to begin.

1. Turn off the water supply by turning off the shut-off valve located behind the toilet.
2. Disconnect the water supply line.
3. Remove the old toilet. Make sure to use the broom and sponge to wipe up any remaining water or debris.
4. Position the new toilet on the floor and press down firmly to get it into place.
5. Secure the toilet to the floor with the included bolts.
6. Place the wax seal on the drain flange.
7. Reconnect the water supply line.
8. Turn on the water supply and check for leaks.

Safety

Toilet installation can be risky. It is important to keep safety in mind while working with heavy tools, water, and electricity. Make sure to always wear protective gear such as gloves and safety glasses. If you’re not comfortable taking on the task of installing a toilet, it’s best to contact a plumber for help.

Installing a new toilet can seem intimidating at first, but the process is relatively straightforward. With the right tools and supplies, you can tackle the job with confidence. For any additional help, don’t hesitate to call in a professional. Installing a new toilet is an exciting and relatively simple project for any homeowner. It’s an easy way to upgrade the look and feel of your bathroom and get rid of an old, leaky or smelly one. But there’s more to it than just taking out the old toilet and putting the new one in. Here are the basics of what you need to know before you get started.

First, it’s important to do your research. Make sure the toilet you are purchasing will fit the space and looks of your bathroom. Take measurements and double-check the configuration of the toilet against the opening in your bathroom floor. Also, make sure your plumbing system is set up correctly. If it isn’t, you may have to upgrade your system with a new flange, wax ring and pipe repair.

Next, it’s time to get the necessary supplies. Although the basics are included with your new toilet, you may need additional items such as a new seat, water supply line, wax ring, T-bolts and toilet mounting hardware. Take inventory of what you have at home and buy the necessary supplies.

When everything is ready, it’s time to remove your old toilet. Start by turning off the water supply and then use a rubber plunger or sponge to remove any remaining water from the old toilet. Then, use a screwdriver to remove the tank from the base. Make sure all the parts are disposed of properly.

Now it’s time to install the new toilet. Place the new wax ring on the flange and line up the new toilet with the mounting bolts in your bathroom floor. Once the toilet is in place, press down firmly and make sure the seal around the ring is solid. Then attach the water supply line, the tank and the mounting hardware. Finally, turn on the water and test out the new toilet.

Installing a new toilet is an easy and rewarding project that anyone can do. Follow the tips above and you’ll be swimming in a pool of bathroom bliss in no time. Happy remodeling!