Having a toilet properly installed in your bathroom is essential for both hygiene and your family's comfort. Here are 9 rules you need to follow for a safe and successful installation.
1. Measure Twice, Cut Once
This is an adage that is still relevant today: take the time to measure twice and make sure you get the right size for your new toilet. The last thing you want is an ill-fitting toilet that doesn't flush properly.
2. Choose Your Location Wisely
Before you begin, it's important to know where you want to place your toilet. Consider both comfort and convenience; look for a spot that is near a plumbing stack and far enough away from the shower or tub.
3. Know Your Plumbing
Toilet installation requires plumbing knowledge, as you'll need to disconnect existing pipes and fit the new toilet securely. If you're not experienced with plumbing, contact a professional to help you with the installation.
4. Connect the Flange
If the toilet is a new installation, you'll need to connect the flange to the floor pipe. Make sure the flange is secured in place with screws and sealant.
5. Install the Wax Ring
The wax ring must be securely in place for a water-tight seal. Make sure the ring is even and fitted tightly in place.
6. Apply Toilet Stop Gap
To prevent water from seeping out of the toilet, apply a toilet stop gap underneath it. This will also help keep the toilet level.
7. Set up the Toilet Seat
Install the toilet seat atop the bowl and use the supplied screws and clips to secure it in place.
8. Connect the Water Supply
You'll need to connect the water supply to the toilet. Make sure the connection is secure and all the pipes are properly fitted.
9. Test it Out!
Once everything is in place, do a test flush to make sure the toilet is working properly. Then, you're all done.
Installing a toilet in your bathroom doesn't have to be a daunting task. With these 9 rules for toilet installation, you can have a safe and successful installation. Best of luck!